Harrington Logo  
Harrington Header
Always Available @ 1-800-213-4528
 
Finish Thompson logo

Harrington carries the full line of FTI (Finish Thompson Inc.) Pumps

Finish Thompson Ultrachem pumps

Finish Thompson Inc. is a designer and manufacturer of industrial pumps. FTI products are manufactured on site in Erie, Pennsylvania, U.S.A. Their products include: DB Series magnetically driven centrifugal pumps, SP Series magnetically driven self-priming pumps, UC Series magnetically driven heavy duty ANSI pumps, high and medium performance drum pumps (PF, EF, TT), high viscosity drum pumps (HVDP). If you are looking to purchase a Finish Thompson Pump Harrington Industrial Plastics is your number one source. Harrington Industrial Plastics has been selling Finish Thompson pumps with an excellent track record for years. Buy your next Finish Thompson Pump from Harrington and experience the difference.

FTI Sealless Pumps

DB Series Plastic Magnetic Drive Pumps
Flooded Suction Pumps

Finish Thompson DB Series pumps
The Finish Thompson DB Series Pumps are the Standard for Hydraulic Efficiency and Corrosive Fluid Handling

Features
• Engineered for performance with state of the art software
• Runs dry for hours without damage
• Best efficiency of any of any pump in its class
• Polypropylene or PVDF corrosion resistant construction
• Horizontal or vertical (with IEC motor only) installation
• High specific gravity handling – over 1.8
• 5 Year Manufacturers Warranty

SP Series Self-Priming Pumps

The Finish Thompson SP Series Pumps are the Most Innovative and Versatile Mag-Drive Centrifugal Pump

Features
• Big on power - short on energy consumption
• Deep-lift capabilities (up to 25 feet/7.6 meters)
• Lightning-fast priming (18 feet/5.5 meters in 90 seconds)
• No seal replacement and no leaks
• Corrosion-resistant materials handle the most difficult applications

UC Series UltraChem Heavy Duty Pumps
Finish Thompson Ultrachem pumps

Finish Thompson's Ultrachem Pumps are Engineered for extreme reliability in the most extreme chemical processing applications, ULTRAChem® is a magnetically driven, ANSI dimensional pump. It is constructed from tough ductile iron with DuPont Tefzel® (ETFE) lining for superior corrosion resistance. Powerful neodymium magnets drive the impeller through a carbon-filled ETFE lined barrier for dependable, leak-free operation with no environmental emissions, no power-robbing double mechanical seals and no seal support systems.

MSKC Series Multistage Pumps

Features
• Sealless mag drive technology - eliminates costly seal problems
• Multi-Stage design: Generates increased head at low flow rates, low power consumption, wide hydraulic envelope allows for mix and match impeller sizes
• Small footprint - avoids large impeller diameters • Unique interconnecting drive shaft - transmits torque from magnetic coupling to first stage impeller
• Independent thrust bearings at each stage for reliability
• Polypropylene or PVDF construction
• Accepts standard NEMA 56C or IEC 71/B14, 80/B14 frame motors • Maximum working pressure 80 psi
• Maximum temperature: 180°F (82°C) - Polypropylene 220°F (104°C) - PVDF
• Maximum flow 60 gpm (12.8 m3/hr.), maximum head 100 ft. (21.3 m)

FTI Sealed Pumps

AC Series Stainless Steel Pumps

FTI AC Series Pumps

The Finish Thompson AC Series Pumps are rugged, metallic centrifugal pumps compact in design, easy to operate and handle, and economically priced. Built from high quality 316 stainless steel, these pumps are available in horizontal, vertical, or vertical cantilevered designs. All wetted parts are constructed of corrosion resistant materials to withstand the harshest chemical environments.

Features
• Corrosion resistant 316 stainless steel
• Close coupled
• Back pull out design for easy service
• Compact design with secure V-clamp (304 stainless steel)
• NPT, BSP, tri-clamp, or flanged connections
• Standard, recessed, or high head impellers
• Bellows Type 21 seals (AC models only)
• Standard NEMA or IEC motor frames
• SS mounting plate for in-tank installation (AV models only)
• FKM, EPDM, or carbon lower bushings (AV models only)
• ATEX certified (AC models with ATEX motors only)
• FDA compliant (AC models with Buna elastomer only)
• 1.8 specific gravity with no impeller trim
• Maximum temperature*: 300°F (149°C)
• Maximum working pressure: 100 psi (6.9 bar)

GP Series Plastic Pumps

FTI GP Series Pumps

The Finish Thompson GP Series plastics pumps are corrosion resistant centrifugal pumps available with a wide selection of mechanical seals. Seals are externally mounted eliminating the need for exotic, expensive materials. All wetted components are non-metallic. These value packed industrial pumps provide reliable service in corrosive environments and are suitable for a broad range of chemicals.

Features
• Mechanical seal horizontal centrifugal pump
• GF Polypropylene or CF PVDF construction
• NPT, BSP, or flanged connections
• Accepts standard NEMA or IEC motor frames
• Up to 7 1/2 Hp (3.0 kW) motors
• Back pull-out feature enables fast access for maintenance
• Close coupled or pedestal mounted
• Bellows, multi-spring or double seals
• Carbon, FKM or ceramic standard seal materials
• FKM or EPDM o-rings standard
• Up to 1.8 specific gravity with no impeller trimming
• Port sizes: 1.5” x 1.5”, 2” x 2”, 3” x 2”
• Maximum temperature: Polypropylene - 180°F (82oC) PVDF - 220°F (104oC)
• Maximum working pressure: 35 psi / 2.4 Bar (GP11) 55 psi / 3.8 Bar (GP22/32)

FTI Verticle Pumps

AK Series Stainless Steel Cantilevered Pumps

The AK Series Rugged, metallic centrifugal pumps are compact in design, easy to operate and handle, and economically priced. Built from high quality 316 stainless steel, these pumps are available in horizontal, vertical, or vertical cantilevered designs. All wetted parts are constructed of corrosion resistant materials to withstand the harshest chemical environments.

Features
• Corrosion resistant 316 stainless steel
• Close coupled
• Back pull out design for easy service
• Compact design with secure V-clamp (304 stainless steel)
• NPT, BSP, tri-clamp, or flanged connections
• Standard, recessed, or high head impellers
• Standard NEMA or IEC motor frames
• 1.8 specific gravity with no impeller trim
• Maximum temperature*: 300°F (149°C)
• Maximum working pressure: 100 psi (6.9 bar)

AV Series Stainless Steel Pumps

The AV Series Rugged, metallic centrifugal pumps are compact in design, easy to operate and handle, and economically priced. Built from high quality 316 stainless steel, these pumps are available in horizontal, vertical, or vertical cantilevered designs. All wetted parts are constructed of corrosion resistant materials to withstand the harshest chemical environments.

Features
• Corrosion resistant 316 stainless steel
• Close coupled
• Back pull out design for easy service
• Compact design with secure V-clamp (304 stainless steel)
• NPT, BSP, tri-clamp, or flanged connections
• Standard, recessed, or high head impellers
• Standard NEMA or IEC motor frames
• SS mounting plate for in-tank installation
• FKM, EPDM, or carbon lower bushings
• 1.8 specific gravity with no impeller trim
• Maximum temperature*: 300°F (149°C)
• Maximum working pressure: 100 psi (6.9 bar)

VKC Series Plastic Mag Drive Pumps

The Finish Thompson VKC Series Plastic Magnetic Drive Pump uses rare-earth Neodymium magnets, to achieve a truly sealless, vertical pump design free of wetted shaft bearings. A completely sealed, air tight column and the absence of a secondary/back impeller prevent aeration (virtually eliminating micro-bubbles) and the release of fugitive environmental emissions. The VKC Series answers conventional vertical pump applications within a wide range of operating conditions.

MSVKC Series Multistage Pumps

The Finish Thompson VKC Series is a multistage verticle sealless pump. The Multi-Stage design generates increased head at low flow rates, low power consumption, wide hydraulic envelope allows for mix and match impeller sizes.

Features
• Sealless mag drive technology - eliminates microbubbles
• Unique interconnecting drive shaft - transmits torque from
magnetic coupling to first stage impeller
• Independent thrust bearings at each stage for maximum reliability
• Polypropylene or PVDF construction
• Titanium, Hastelloy C or PVDF housing bolts
• Custom mounting plates available
• Accepts standard NEMA 56C or IEC 63, 71 and 80 with B14 frame
motors
• Maximum working pressure 80 psi (5.4 bar)
• Maximum temperature: 140F (60°C)
• Maximum flow 60 gpm (13.6 m3/hr.), maximum head 100 ft.

FTI Drum Pumps

PF - High Performance Pumps

Finish Thompson Drum Pumps
The Finish Thompson PF Series Sealless, High Performance Drum Pump Unique double suction impeller provides high flow and high head. Featuring multiple material options and connections, the PF Series is designed for container-to-container transfer of acids, corrosives, and chemicals. Features include: Polypropylene, PVDF, or 316SS tubes Interchangeable with motors, greater flow control with variable orifice discharge (PFM/PFP/PFV only), Up to 2000 cP with M58P/M59P motors, FDA-compliant option, built-in hose and cord clips (PFM/PFP/PFV only).

EF - Economy Pumps

The Finish Thompson EF Series Best Value Sealless! The EF Series pumps provide an economical choice for light duty transfer. An ideal replacement for hand pumps. Features include: Polypropylene, pure polypropylene/PVDF, or 316 stainless steel tubes dual speed adjustable motors tubes interchangeable with motors lightweight & economical Plastic models have built-in hose cord & clips.

TT - Mid-Performance Pumps

The Finish Thompson TT Series Sealed, Medium Viscosity/Flow TT Series pumps offer light to medium viscosity fluid handling. Drum pumps in this series are ideal for liquids containing small particulate or solvents. Features include: 316 stainless steel or CPVC tube materials, tubes interchangeable with motors Up to 2000 cP with M6X air motor, FDA-compliant STTS option.

HVDP - High Viscosity Drum Pumps

The Finish Thompson HVDP Series High Viscosity/High Head Sealed Design. This progressive cavity, positive displacement-style pump can handle viscous fluids up to 100,000 centipoise! The heavy duty HVDP offers multiple mechanical seal choices and matierals options for ultimate compatibility. Choose from the HR model (up to 20,000 cP) or the LR model (up to 100,000 cP).

BT - High Viscosity Pumps

The Finish Thompson BT Series Sealed, High Viscosity.
This stainless steel model with sealed design is made with PTFE screw-type lifting compressors to handle liquids with higher viscosities.

TM - Drum Mixer Pumps

The Finish Thompson TM Series Medium Viscosity Drum/Barrel Mixer The TM Series Drum Mixer is a 4-blade, turbine drum mixer ideal for mild corrosives, solvents, or flammables of light to medium viscosity.

TB - Mid-Performance Pumps

The Finish Thompson TB Series Sealed, Lightweight Economy Drum Pump Lightweight pumps suitable for low to medium viscosity mild corrosives, solvents, and chemicals.